Title |
Authors |
Title of Journal |
Year |
Volume |
Number |
Page |
Realization of exceptionally high elongation at high strain rate in a friction stir processed Al-Zn-Mg-Cu alloy with the presence of liquid phase |
K. Wang, F.C. Liu, Z.Y. Ma |
Scripta Mater |
2011 |
64 |
6 |
572-575 |
Enhancing Strength and Maintaining Ductility of Mg-3%Li-1%Sc Alloy by Equal Channel Angular Pressing |
Yang H J, Shao X H, Li S X, Wu S D, Zhang Z F |
MATERIALS SCIENCE FORUM |
2011 |
667-669 |
5 |
839-844 |
Influence of Cr addition on microstructure of a 5% Re-containing single crystal nickel-based superalloy |
Tan X P, Liu J L, Jin T, Sun X F, Hu Z Q |
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA |
2011 |
21 |
5 |
1004-1008 |
X-ray powder diffraction data for Al-Cu-W phases |
B. Grushko, S.B. Mi |
POWDER DIFFRACTION |
2011 |
26 |
1 |
70-73 |
Structural evolution of Ce1-xGdxFeAsO0.84F0.16 superconductors |
Yang J L,Ren W J,Li D,Zhang Z D |
JOURNAL OF APPLIED PHYSICS?? |
2011 |
109 |
7 |
07E154-1 - 07E154-3 |
Rapid reductive degradation of azo dyes by a unique structure of amorphous alloys |
C.Q. Zhang, Z.W. Zhu, H.F. Zhang, Z.Q. Hu |
Chinese Sci. Bull. |
2011 |
56 |
5 |
3988-3992 |
Effects of Bi addition on microstructures and mechanical properties of AZ80 magnesium alloy |
Wang Y X, Zhou J X, Wang J, Luo T J, Yang Y S |
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA |
2011 |
21 |
4 |
711-716 |
The effect of complex halides and binary halides on hydrogen release for the 2LiBH4:1MgH2 system |
Yang Z X, Grant D M, Wang P, Walker G S |
Faraday Discuss |
2011 |
151 |
5 |
133-141 |
Effects of grain growth on interface diffusion in nanostructured Cu |
Wang Z B, Lu K, Wilde G, Divinski S V |
Scripta Materialia |
2011 |
64 |
11 |
1055-1058 |
Comparison of microstructures and mechanical properties of a Cu-Ag alloy processed by different severe plastic deformation modes |
Tian Y Z, Jiang C B, Wu S D, Zhang Z F, Figueiredo R B, Gao N, Langdon T G |
MATERIALS SCIENCE AND ENGINEERING A |
2011 |
A528 |
13-14 |
4331-4336 |
Fundamental factors on formation mechanism?of dislocation arrangements?in?cyclically deformed fcc?single crystals |
Li P, Li S X, Wang Z G, Zhang Z F |
PROGRESS IN MATERIALS SCIENCE |
2011 |
56 |
3 |
328-377 |
The mechanism of oxide film formation on Alloy 690 in oxygenated high temperature water |
W. Kuang, X. Q. Wu, E. H. Han, J. C. Rao |
Corrosion Science |
2011 |
53 |
11 |
3853-3860 |
Joining of Ti3SiC2 by Magnetron Sputtering a Layer of Cu or Zr Followed by Heat Treating at Relatively Low Temperatures |
Li A J, Zhou Y C |
JOURNAL OF AMERICAN CERAMIC SOCIETY |
2011 |
94 |
9 |
3072-3077 |
A segregative MC carbide in centrifugal casting high speed steel roll |
Luan Y K,Song N N,Bai Y L,Kang X H,Li D Z |
ADVANCED MATERIALS RESEARCH |
2011 |
154-155 |
1 |
269-272 |
Achieving maximum photo-oxidation reactivity of Cs0.68Ti1.83O4-xNx photocatalysts through valence band fine-tuning |
Liu G, Niu P, Wang L Z, Lu G Q, Cheng H M |
CATALYSIS SCIENCE & TECHNOLOGY |
2011 |
1 |
2 |
222-225 |